Differences exist in the way signallers and Protection Officers (POs) identify trains to each other.
Sydney Trains' coded ASB trial has continued while Sydney Trains prepares for full implementation. In order to fully implement coded ASB rule changes and consultation are required. The development of the rules is underway and consultation will follow. At this time it is anticipated that coded ASB will be fully implemented by the end of March 2016. The Australian Transport Safety Bureau recognises Sydney Trains' continued action on this issue by way of assessing and implementing a ‘coded Absolute Signal Blocking process’ and is satisfied that this process, if completed and implemented, will improve the way signallers and Protection Officers (POs) identify trains to each other and result in the lowering of risk associated with worksite protection by ASB. On the basis therefore, that Sydney Trains remain committed to implementing a new (Coded) ASB rule/procedure, the ATSB has re-assessed the status of this issue and has formally closed it as ‘Adequately Addressed’.
Sydney Trains assumes that this relates to a protection officer visually identifying a train passing a worksite. Identifying an existing train within a section using this method can be problematic for a variety of reasons, including; identifying small target numbers on suburban rolling stock, reconciling stock numbers with train numbers etc.
The current rules do not specify a particular method to be used to identify trains, but instead allows the signaller some autonomy in how they would do this. It is believed that the coded ASB process requirement to establish and record the location of the last train to pass the protecting signal will address this action.
The Australian Transport Safety Bureau is satisfied that the ‘coded Absolute Signal Blocking process’, if completed and implemented, will improve the way signallers and Protection Officers (POs) identify trains to each other.
The ATSB is proceeding to monitor all the proposed safety actions and Safety Recommendation RO-2013-018-SR-085 and would appreciate periodical updates as to the progress with their implementation. We would appreciate an update on the progress in implementation of all the planned actions as at the end of August 2015 by 10 September 2015. Includes a response by Sydney Trains, followed by an explanation by A/GM Surface Safety as to intent of ATSB monitoring.
ST response to Safety REC RO-2013-018-SR-085 re. Coded ASB trial & auditing of worksites. ST advises: "...the Coded ASB trial for the protection of maintenance activities has been successfully concluded and it is intended to roll out those changes to the ASB process across our network. This will be achieved by developing and issuing amendments to the current ASB rule and procedure......It is anticipated that full implementation of the coded ASB should be complete in mid-2016". ST adds that they are developing an audit programme of random audits: "...that will assess the effectiveness and compliance to Sydney Trains' Network Rules and Procedures work on track rules and procedures with a focus on NWT 308 ASB Working. These audits will commence during April 2015". No end date is provided.
Sydney Trains stated: "Sydney Trains is happy to supply the ATSB with access to the amended Network Rules & Procedures regarding ASB when they are introduced." The Australian Transport Safety Bureau recognises Sydney Trains' continued action on these issues by way of assessing and implementing a Coded ASB worksite protection process. On the basis therefore, that Sydney Trains remain committed to implementing a new (Coded) ASB rule/procedure, and working on the assurances that this process will result in the lowering of risk associated with worksite protection by ASB, the Australian Transport Safety Bureau has re-assessed the status of these issues and has formally closed them as ‘Adequately Addressed’.
Sydney Trains stated: "in relation to the implementation of coded ASB; the trial has continued while Sydney Trains prepares for full implementation. In order to fully implement coded ASB rule changes and consultation are required. The development of the rules is underway and consultation will follow. At this time it is anticipated that coded ASB will be fully implemented by the end of March 2016". The ATSB responded: "The ATSB recognises Sydney Trains' continued action on these issues by way of assessing and implementing a Coded ASB worksite protection process. In order for the ATSB to close out safety issues, it must assess the residual level of risk, based on the actions undertaken by the risk owners. On the basis therefore, that Sydney Trains remain committed to implementing a new (Coded) ASB rule/procedure, and working on the assurances that this process will result in the lowering of risk associated with worksite protection by ASB, we have re-assessed the status of these issues and will formally close them as ‘Adequately Addressed’. The ATSB would, however, appreciate being provided with appropriate access to the new rulesets once they are implemented."
